English
HANDAN HAOSHENG FASTENER CO., LTD.

GB/T 898 Double End Studs China Factory Reliable Supplier

GB/T 898 Double End Studs China Factory Reliable Supplier

Haosheng Fasteners supplies GB/T 898-1988 double-end studs with bm=1.25d. Available in carbon steel, alloy steel and stainless steel, multiple property classes and surface finishes. Suitable for pumps, valves, flanges and mechanical equipment that requires frequent disassembly. We support custom sizes and drawings, samples are available.

  • Description
gbt898-double-end-studsgbt898-double-end-studs

Haosheng Fasteners supplies GB/T 898-1988 double-end studs with an installed-end engagement length of bm = 1.25d. Both ends are threaded: one end is screwed into a tapped hole in a machine body or base component, while the other end takes a nut. Because the stud stays seated in the body while the outer part is removed, these studs suit pumps, valves and equipment housings, machinery and transmission assemblies, cast iron machine bodies, and pipe flanges and equipment accessories that need periodic inspection or maintenance. The current national standard covers metric coarse threads M5-M48 and defines Type A and Type B structural forms.

Carbon steel, alloy steel and stainless steel are supplied according to the specified property class and service environment. Steel parts are available in 4.8, 5.8, 6.8, 8.8, 10.9 and 12.9 classes under GB/T 3098.1-2010, while stainless parts follow GB/T 3098.6-2023 with designations such as A2-50 and A4-70 confirmed to the order. Plain, zinc-plated and passivated zinc finishes are listed in GB/T 898-1988, with other treatments agreed to the working environment. Product grade B is a dimensional tolerance grade and must not be confused with the Type A and Type B shank forms. Fine-pitch and transition-fit threads, overall length l, structural type, material, class and finish are set from your drawing or sample, so the installed end, nut end and joint stack clamp as designed.

Detailed Parameters

Executive StandardGB/T 898-1988Engagement Lengthbm = 1.25d
Thread RangeM5-M48Product GradeB
Structural TypesType A / Type BThread TypeMetric Coarse / Fine / Transition Fit
MaterialsCarbon / Alloy / Stainless SteelProperty Classes (Steel)4.8 / 5.8 / 6.8 / 8.8 / 10.9 / 12.9
Surface FinishesPlain / Zinc Plated / Passivated ZincSamplesAvailable upon request

Technical note: GB/T 898-1988, Double end studs bm=1.25d, is currently listed as valid on the National Public Service Platform for Standards Information. It was issued on 1988-02-06, implemented on 1989-01-01 and replaced GB 898-1976; the 2022 review concluded that a revision is needed, but no replacement edition has been published. The standard specifies metric coarse threads M5-M48 with bm = 1.25d at product grade B, where B is a dimensional tolerance grade, not a mechanical property class. Type A and Type B are structural shank forms, with Type B using a reduced-diameter shank, and they are unrelated to the grade B designation. Related standards are not interchangeable: GB/T 897 uses bm = 1d, GB/T 899 uses bm = 1.5d and GB/T 900 uses bm = 2d. bm describes the installed end only, not the overall stud length l; l must also cover the connected parts, washers, nut height and effective exposed thread length. Steel mechanical properties follow the current GB/T 3098.1-2010 and stainless properties the current GB/T 3098.6-2023; the steel grade itself is confirmed from the order and material certificate, not inferred from the property class. Surface condition affects thread fit, so stud and nut tolerances and coatings should be confirmed together, and any salt spray hours or coating thickness must be stated in the order or technical agreement. Fine-pitch and transition-fit (interference-fit) threads are permitted by the standard and must be named when ordering. These figures describe the scope of the standard, not a stock list: nominal diameter, pitch, bm tolerance, nut-end thread length and overall length l must be checked against the standard table and the order drawing; sizes shown in parentheses in that table are non-preferred.

Key Advantages

Fixed Stud Design

The installed end stays in the tapped body, so covers and housings come off without disturbing the base threads.

Defined bm Length

A defined 1.25d engagement length separates GB/T 898 from the 1d, 1.5d and 2d series, preventing mis-ordered stock.

Grade B Clarity

Grade B refers to dimensional tolerances and is kept separate from Type A / B shank forms and property classes.

Defined Class Range

Steel classes 4.8 to 12.9 and order-confirmed stainless designations let the joint load drive selection, not appearance.

Finish and Thread Fit

Plain, zinc and passivated zinc finishes are matched to nut thread tolerances, with coating requirements stated in the order.

Drawing-Based Builds

Diameter, l, bm, thread type, structural type, class, material and finish are built from your drawing or sample.

Product Gallery

Management Platforms

Drawing and Standard Review

The required standard, bm value, joint stack and tapped-hole material are checked before quotation and drawing review.

Material and Class Control

Steel classes follow GB/T 3098.1-2010 and stainless designations GB/T 3098.6-2023, verified to the ordered class.

Precision Threading

Installed-end and nut-end threads, end chamfers and fine or transition-fit options are formed and gauged to the drawing.

Shank and Length Control

Type A or Type B shank form, bm, nut-end thread length and overall length l are set to the assembly stack.

Coating and Fit Control

Plating thickness, passivation and thread tolerances are confirmed for both stud and nut before plated release.

Technical Documentation

Material certificates, batch traceability and coating or salt spray test reports can be written into the order.

Standard and Specification Comparison

Comparison FeatureGeneric Mixed-Standard StudsHaosheng GB/T 898-1988 Studs
Governing StandardNo bm series or edition statedGB/T 898-1988, bm = 1.25d
Engagement Length1d / 1.5d / 2d mixed in one order1.25d installed end, checked per drawing
Grade B InterpretationOften treated as a strength ratingDimensional tolerance grade, separate from Type A / B
Property ClassQuoted by material name onlySteel 4.8-12.9 to 3098.1; stainless to 3098.6
Order InformationNominal diameter and length onlybm, l, thread type, type, class, finish, quantity

Selection note: Matching only the nominal thread diameter is not enough. Confirm the bm value, overall length l, nut-end thread length, Type A or Type B shank form, product grade and thread type before any of the GB/T 897, 898, 899 or 900 series is substituted, because the installed-end engagement lengths differ and the tapped-hole material governs the required thread engagement. Product grade B describes dimensional tolerances, not mechanical strength; the property class, material grade and any certificate or batch traceability requirement are separate order items. Coating thickness changes thread fit, so state the finish and tolerance for the stud and the mating nut together, and record any required salt spray duration or plating thickness in the technical agreement. Fine-pitch and transition-fit threads must be named explicitly, since the coarse-thread series is the default. Standard tables give bm as a toleranced value and list non-preferred sizes in parentheses; nominal length and the whole joint stack must be taken from the applicable standard table and the order drawing rather than from a generic stock list.

Frequently Asked Questions

Q: Can GB/T 897, 899 or 900 studs replace GB/T 898 parts?

No. They specify bm = 1d, 1.5d and 2d respectively. Installed-end engagement differs, so confirm the tapped-hole material and drawing before any substitution.

Q: Is product grade B a strength rating?

No. Grade B is a dimensional tolerance grade. Strength is a separate property class such as 8.8 or 10.9 for steel, or an A2 / A4 stainless designation confirmed to the order.

Q: What overall length l should I order?

bm = 1.25d covers only the installed end. Length l must also include the clamped parts, washers, nut height and exposed thread, so state l separately on the order.

Q: Which nuts and thread fit should I match?

Match the nut property class to the stud class and confirm thread tolerance and coating for both. Zinc or passivated surfaces can change fit, so specify stud and nut finishes together.

Q: Can I order fine threads, custom materials and finishes?

Yes. GB/T 898-1988 permits fine-pitch and transition-fit threads, and material, class, finish and length follow your drawing or sample. State any special thread type clearly.

Q: Can you supply certificates, test reports and samples?

Yes. Material certificates, batch traceability and coating or salt spray requirements can be written into the order. ISO 9001, ISO 14001 and ISO 45001 certified production; samples available.

Need GB/T 898 Double-End Studs? Send Your Drawing and bm Requirements for a Quote.

Please include thread size, overall length l, bm, Type A or Type B, property class, material, surface finish and quantity, plus the tapped-hole material and the mating nut specification for review.

Contact Us

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.